|
Ø Easy-to-follow owners manual and DVD covering installation and pet training
How Radio Fence Plus Works:
A radio signal is sent by the transmitter to a receiver on your dog's collar. The signal is transmitted through a wire which is placed along the boundaries you want to establish. The wire is really an antenna that carries the signal. You can adjust the signal to up to 15 feet from the wire. In most cases, a 4-6 foot signal field will be the best for optimal training. The receiver provides a warning beep as your dog approaches the wire. If he starts to cross the wire, he will receive a mild correction. Although the correction is harmless, it will dissuade him from continuing.
When using the remote, the fence transmitter floods the area inside the boundary wire with the signal and this activates the receiver. All receivers within the boundary will activate when the remote is used. If you have more than one dog, you may want to remove the receiver from the other dog(s) so they do not get a correction.
With two levels of correction for the remote training mode, this pet training system is effective on any dog. The remote training function will work on systems up to 1200 ft. in length (approx. 2 acres). The containment function will work on up to 100 acres. The remote training function has a negative tone without correction and a negative tone with correction. After a few corrections, your dog will associate the tone with the correction. This makes the remote trainer one of the most humane trainers available since before long, all you will need to correct your dog is the negative tone.
|